Thanks to its 6 brushes, the machine meets the highest industrial cleaning standards. it is particularly suitable for in-line applications, it can also be combined with robotic systems. Made exclusively in closed top version, it allows you to wash a minimum glass of L = 450 mm H = 250 mm.

The washing machine is equipped with a washing / rinsing area totally in stainless steel combined with a drying area. The two parts are separated and are connected during installation on site (a necessary condition to be able to easily transport the machine).

Both areas of the machine are accessible by opening doors, equipped with safety micro-switches on the drying part. The movement mechanics is placed in the lower part, under the base. In the upper part there is the motorization for the brushes, consisting of a motor for each brush. The standard configuration of the brushes foresees the front ones of the low-e type and the rear ones for normal glass.

• Machine made in two parts: washing and drying.
• Easy to install and fast to transport thanks to its sectioning.
• Uses 6 brushes for washing, with high hydraulic efficiency pumps. The pumps only mount stainless steel impellers.
• Drying is guaranteed by a 29 kW ventilation system.
• The brushes are driven by an inverter system with an acceleration / deceleration ramp to optimize mechanical performance and reliability over time.
• The upper frame is made of AISI 304 tubular structure bearing and bodywork with laser-cut stainless steel sheets. This guarantees high operating speed with strongly contained vibrations.
• Operating speed from 1 to 5m / min